Combined ping and traceroute — multi-pass hop measurements visualized on a path mapai人工智能免费
After you submit a task, the path map and hop list will appear heresaylo国际版
• Target: enter a domain or IP address (e.g. example.com or 1.1.1.1)
• How it works: first traces the path via traceroute, then pings each hop 3 times to record latency and packet loss
• Path map: each hop is plotted on a world map via GeoIP — hover to see IP, location, and RTT
• Hop list: full table of hop / IP / hostname / packet loss / average latency
• * hops: the router does not respond to ICMP — this is normal behavior
• Use case: pinpoint the exact hop causing packet loss or high latency
MTR (My Traceroute) combines traceroute and ping into a single test: it first discovers the path to the target hop by hop, then pings each hop multiple times to collect packet loss percentage and average, minimum, and maximum latency. The result gives you a continuous-quality view of every router along the path rather than just the endpoint.百度ai app
Common uses include diagnosing intermittent packet loss on a specific transit hop, comparing path quality from multiple source regions, and confirming whether a routing problem is at the edge, at an intermediate carrier, or at the destination. Each hop is plotted on a map via GeoIP so you can see the physical path at a glance.agi和ai的区别
Traceroute sends one probe per hop and stops. MTR continuously probes each hop and accumulates statistics, revealing intermittent loss or jitter that a single traceroute pass would miss.豆包下载安装
Usually not. Many routers deprioritize or rate-limit ICMP responses to probes while forwarding data traffic normally. If the destination is reachable and has acceptable latency, those silent hops are not a problem.ai是人工智能吗
For data traffic, 0% is the goal. Any sustained loss above 1-2% on a production path warrants investigation. A single silent hop in the middle is normal; consistent loss near the destination is a real problem.trae国际版
The probe count per hop is configurable; the default is typically 3 passes. More passes give more stable statistics but take longer — use the traceroute tool for a quick single-pass path check.京灵平台官网